Product Description:
- Flex-Guard 250 System is a unique, 100% solids, monolithic, solvent free, epoxy system designed to be applied over concrete walls and floors.
- Flex-Guard 250 System consists of a seal coat, polyester fabric and a topcoat of Flex-Guard 250 System, which when applied to walls or floors, will form a resilient, monolithic surface.
- Due to the resiliency and polyester fabric, Flex-Guard 250 System has the ability to resist cracking due to changes in the weather.
Application:
- Inside or Outside Containment Areas
Application Instruction:
- Remove all existing coating.
- Mechanically clean (sandblast) walls and floors to remove all oils and contaminants.
- Repair all cracks and voids to floors and walls with acid proof cement.
- Apply seal coat of Flex-Guard 250 sealer.
- Embed the polyester mat into the sealer and wet out with another coat of Flex-Guard 250 Sealer.
- After Flex-Guard 250 has set, apply a final coat of Flex-Guard 250 sealer to give a finished total thickness of approximately 1/8″.
- Caulk around all tank bottoms and pad as well as any piping that is imbedded into the concrete.
Special Features:
- Hides Joints and Cracks
- Continuous Weave Polyester Fabric
- Meets U.S.D.A. Requirements
- Low Odor / Solvent Free
- Resin Rich Surface for Chemical Resistance
- Adhesion to Clean, Sound Damp Concrete
- Built in Resiliency for Thermal Shock
- Excellent Chemical Resistance
Colors:
Black, White, Ivory, Gray, Dark Gray, Brick Red, Beige, Green and Brown. Special colors are available upon request, for an additional charge.
Precautions:
As with all epoxies, good hygienic habits must be observed and the wearing of protective clothing and gloves is advised. Before using this product, please read the material safety data sheet.
| Set Times (Slab Temperature) | 50° F | 73° F | 90° F |
| Pot Life | 1 Hour | 45 minutes | 25 minutes |
| Recoat Time – Floors | 18 Hours | 15 hours | 12 Hours |
| Recoat Time – Walls | 12 Hours | 9 hours | 6 Hours |
| Foot Traffic | 18 Hours | 15 hours | 12 Hours |
| Forklift Traffic | 72 Hours | 48 hours | 24 Hours |
| Full Chemical Resistance* | 9 Days | 7 days | 5 Days |
| ASTM | TEST METHOD @ 73° F | Results |
| C579 | Compressive Strength | 5946 psi |
| C579 | Percent Compressive Resiliency | 42.73% |
| C579 | Compressive Strength @ Yield | 1608 psi |
| C579 | Percent Compressive Resiliency @ Yield | 6.36% |
| C580 | Flexural Strength | 2700 psi |
| C580 | Flexural Modulus of Elasticity | 1,43 x 10 (5th power) |
| C307 | Tensile Strength | 1500 psi |
| C307 | Percent Tensile Elongation | 15.51% |
| C321 | Bond Strength to Concrete | Failure in Concrete |
| C884 | Thermal Compatibility to Concrete | Pass |
Warranty:
All products manufactured by us are warranted to first class material and free from defects in material and workmanship. Liability under this warranty is limited to the net purchase price of any such products proven defective, or, at our option, to the repair or replacement of said products upon their return to us transportation prepaid. All claims hereunder on defective products must be made in writing within 30 days after the receipt of such products in your plant and prior to further processing or combining with other materials and products. WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY OF ANY OF OUR PRODUCTS FOR ANY PARTICULAR USE, AND WE SHALL NOT BE SUBJECT TO LIABILITY FROM ANY DAMAGES RESULTING FROM THEIR USE IN OPERATIONS NOT UNDER OUR DIRECT CONTROL.
THIS WARRANTY IS EXCLUSIVE OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND NO REPRESENTATIVE OF OURS OR ANY OTHER PERSON IS AUTHORIZED TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF OUR PRODUCTS.
SDS Sheet:
